Scope

Screenshot 2024-06-13 15-24-57

Scope is a simple CV and clock monitoring tool.

Phazerville Suite has updated it with more options and an X-Y view mode that plots both inputs in 2 dimensions. In v1.7.1, the help screen (double press UP button for left hemisphere, double press DOWN button for right hemisphere) has also been replaced with a full-screen view for maximum resolution.

Screenshot 2024-06-13 15-26-15 Screenshot 2024-06-13 15-32-19

I/O

  1/3 2/4
TRIG Clock for BPM counter Sync pulse for display wavelength
CV INs Signal 1 Signal 2
OUTs Pass-thru Pass-thru

UI Parameters

  • Mode
    • 1+1 (Scope signal 1, Report signal 1)
    • 1+2 (Scope signal 1, Report signal 2)
    • 2+1 (Scope signal 2, Report signal 1)
    • 2+2 (Scope signal 2, Report signal 2)
    • 1,2 (Scope XY)
  • Rate (see notes)
  • Freeze (toggle)

Notes

The “Rate” control is the number of 60µs “ticks” that will elapse between samples. 64 samples will be shown on the display at any time. The display is bi-polar. You can use the encoder to find the best rate at which to view a waveform. Starting at Hemisphere Suite 1.1: If you send a clock to Digital 2 with the same period as the signal to CV 1 (for example, EOR trigger of Maths while viewing a waveform from Maths), Scope will automatically adjust the sample rate for the best view.

Note: Everything’s approximate, including the CV passthru.

Credits

Originally authored by Chysn (Jason Justian) with modifications by Tom Waters & djphazer