ADSR EG
ADSR EG is a linear envelope generator with two independent channels.
I/O
| 1/3 | 2/4 | |
|---|---|---|
| TRIG | Channel A Gate | Channel B Gate |
| CV INs | Env. A Release | Env. B Release |
| OUTs | Envelope A | Envelope B |
Caveat: ADSR envelopes require a proper Gate signal to activate and hold high the sustain stage. As such, internal clock triggers and trigger input multiplication/division will not affect it. However, you can potentially assign the output signal from another applet. If you need an envelope that responds to simple rising edge triggers - either physical or virtual - try AD-EG instead.
The CV inputs modulate the release stage over a range of about -3 volts to about 3 volts. There is a small center detent in the middle of the range, at which point no modification will be made.
UI Parameters
- Channel A: Attack duration
- Channel A: Decay duration
- Channel A: Sustain level
- Channel A: Release duration
- Channel B: Attack duration
- Channel B: Decay duration
- Channel B: Sustain level
- Channel B: Release duration
Credits
Adapted from the original ADSR EG by Chysn, with modifications by ghostils.
Future improvements may be derived from the subsequent ADSREG_PLUS applet by ghostils.